Whether milling or leveling is the better choice depends on the degree of unevenness and its cause. For height differences resulting from protruding material, hard surfaces, or an excessively high surface, milling is the most direct solution. For a floor that is too low or too porous, leveling offers a better outcome. Below, we answer the most frequently asked questions about both methods so that you know exactly which approach suits your situation.
What are the main differences between milling and leveling?
Milling and leveling are two fundamentally different methods for repairing an uneven concrete floor. At concrete milling Material is removed from the surface using a milling machine. With leveling, on the other hand, material is added in the form of a leveling layer or pourable mortar. The choice depends on whether the floor is too high or too low.
Specifically: milling is a subtractive process and leveling is an additive process. When you want to mill a concrete floor, the top layer of the concrete is mechanically milled away until the desired level is reached. This results in a flat, rough surface that is immediately ready for further finishing.
Leveling works differently. With this method, you apply a self-leveling product over the existing floor, which fills in the low points and creates an even surface. This is a wetter, more labor-intensive technique where drying time also plays a role.
- Milling: removes material, suitable for protruding parts, hard surfaces, and height differences where the floor is too high
- Leveling: adds material, suitable for holes, dents, and low spots where the floor is too low
- Milling is faster and requires no drying time
- Leveling requires a well-adhering substrate and sufficient curing time
When is milling the better choice for a concrete floor?
Milling is the better choice when the concrete floor is too high locally or over a larger area, when hardening or protrusions are present, or when the floor has a poor bonding layer that needs to be removed. Milling is also the method of choice for removing adhesive residue, coatings, or other surface treatments.
Milling an uneven concrete floor is particularly useful in the following situations:
- The floor has local high points or thresholds that obstruct new floor covering.
- There are harder zones in the concrete due to uneven curing.
- Old adhesive residues or coatings must be removed before a new finish can be applied.
- The floor must be prepared for laying tiles, parquet, or a poured floor.
- This involves repairing a concrete floor where the damaged top layer must be completely removed.
An additional advantage of milling is that the result is immediately visible and verifiable. There is no waiting time, and the floor is immediately usable for the next step in the construction process after milling.
When is leveling more suitable than milling?
Leveling is more suitable than milling when the floor has low spots, depressions, or an undulating surface where the concrete is not too high but rather too low. Leveling is also a more efficient choice for large surfaces with small height differences that are too time-consuming to mill.
Specific situations where it is better to opt for leveling a floor:
- The floor has depressions or subsidence caused by shrinkage or poor compaction during pouring.
- The height difference is minimal, but distributed across the entire floor.
- The concrete floor has good structure and adhesion, but an irregular surface.
- You want to create a smooth surface for a thin floor covering such as vinyl or carpet.
Do keep in mind that leveling only works well if the substrate is stable, dust-free, and sufficiently adhesive. Poor adhesion causes the leveling layer to detach later, which exacerbates the problem instead of solving it.
How much does it cost to have a concrete floor milled?
The cost of milling a concrete floor depends on several factors, including the surface area, the thickness of the layer to be removed, the accessibility of the location, and the hardness of the concrete. Therefore, it is difficult to provide an exact price without an inspection.
The following factors determine the final price:
- Surface: The larger the surface to be milled, the more time and equipment are required.
- Thickness of the milling layer: Removing a thin finish takes less time than deep milling.
- Hardness of the concrete: Harder concrete wears down the milling material faster and increases the processing time.
- Opening hours office Working in narrow spaces or on upper floors requires different equipment.
- Additional work: removing milling residue or cleaning the floor afterwards
Always request a targeted quote based on your specific situation. This way, you know exactly where you stand and won't be faced with any surprises.
Can a concrete floor also be too uneven to mill or level?
Yes, in some cases a concrete floor can be so severely damaged or uneven that neither milling nor leveling offers an adequate solution. This is particularly the case when the floor has structural damage, such as cracks that extend deeper than the surface, or when the concrete is internally affected by moisture or freezing.
In such situations, two directions are possible:
- Combination of methods: first mill to remove the worst material, then level to restore the level.
- Partial or complete demolition: When the floor is structurally beyond repair, it may be necessary to demolish the floor and pour a new one.
After an inspection, a professional can assess whether milling or leveling is sufficient, or if more drastic measures are required. Do not attempt to estimate yourself whether a severely damaged floor can still be saved, as a wrong choice can lead to bigger problems later on.
How De Betonboorder helps with your uneven concrete floor
At De Betonboorder, we help you from start to finish with repairing an uneven concrete floor. Whether it involves a minor imperfection or a larger milling job, we ensure a professional approach with the right machines and experienced craftsmen.
- We assess on-site which method is most suitable for your situation.
- We precisely mill concrete floors, even in occupied situations and hard-to-reach areas.
- We work with high-quality equipment that causes minimal disruption.
- We leave the workplace neat and tidy.
- In many cases, we can schedule a professional within two days.
Would you like to know what we can do for your floor? Then contact us and we will respond within 24 hours with suitable advice or a quotation.
Related Articles
- Can I continue living in my home while a stairwell is being constructed?
- How much does the work for a hole in the upper floor cost?
- Are my wall ventilation grilles blocked, or are there too few?
- Innova 9HP Mini vs Innova 10HP: which one do you choose for a small space?
- How much does it cost to keep your entire house cool with an air conditioner?
- How often should you clean an air conditioner?
- What is a ceiling air conditioning unit?
- How can I lower the temperature in my house?
- Can an air conditioner double the electricity bill?
- What do you do if there is a crack in the wall after drilling?
- What are the dangers of inhaling concrete dust?
- Are you allowed to drill in a rental property without permission?
